American transparent injection molding grade.
. Long-term supply: Basic Innovation Plastics
< :r . . English name:
< :r . < :r . . Supply to the United States: r , , r , , r , ,, ,r,,
< :r . . Supplies to the United States: ,r ,,,,,,,,,
< :r . . Supplies to the United States: High Liquidity
< :r . .Supplies The United States: ultra-high viscosity
<:r. . Supplying the United States: low viscosity fireproof grade r, r,
<:r. . Supplying the United States: medium viscosity fireproof grade-, -supplying the United States: optical grade, ,
< :r . . Supplied to the United States: UV-resistant grade
< :r . . Supplied to Bayer, Germany: fiber-added flame retardant grade
< :r . . Supplied to Bayer, Germany: transparent flame retardant Grade,
< :r . . Supplied by Bayer, Germany: Transparent UV-resistant grade
< :r . . Supplied by Bayer, Germany: Food grade impact-resistant and high flow
< :r . . Supplied by Bayer, Germany ：
< :r . . Supply Japan Mitsubishi: weather resistance r ,
< :r . . Supply Japan Mitsubishi: high viscosity anti-UV grade fire protection grade
< :r . . Japan Mitsubishi r .r .
< :r . < :r . . It belongs to the polyester carbonate combination, which is composed of aromatic combinations and burns slowly (the fire protection level is even).
< :r . . Shrinkage: Yes.~.(.%~.%) Containing % glass fiber Yes.~. Mixtures Yes.~.
< :r. .. Do not contact hot water above ℃ for a long time. When burned, it will emit pyrolysis gas. The plastic will burn and foam, but it will extinguish when it is removed from the fire source. It will emit a rare and thin phenol smell. The flame will be yellow and light black. When the black temperature reaches ℃, it starts to soften and melts at ℃, which can absorb the infrared spectrum.
< :r . ., baking material: ℃/~hours, the mixture is baked at ℃/hour, the mold temperature is ~℃, the melt temperature is ℃. Use the raw beer plastic to dry for 1 hour, then add the nozzle material or the weather is humid for 1 to 3 months, then bake the material for 1 hour.
< :r . . . The glue injection machine should be disassembled regularly to check its melting condition because the end edges of the bubbles will appear on the surface of the product and may produce low-quality products (still beautiful in appearance). The melt temperature of the mixture cannot exceed ℃ and is also between ~ ℃.
< :r . . Barrel residence time: At ℃, it will degrade, emit carbon dioxide and turn yellow. Mechanical properties should be reduced. Excessive processing temperature range should be avoided. Excessive residence time should be less than 1 minute.
< :r . . The faster the glue injection speed, the better, and the slower the glue return speed. Low back pressure (r) helps to prevent vaporization and quality degradation.
< :r . . Do not use D.,, to wash the machine when it is shut down. These materials will contaminate and degrade the quality of the machine. D., should be used for cleaning.
< :r. .. Do not use a torch to clean the metal parts of the injection molding machine. They can be heated at ℃ and then cleaned with a wire tool.
Suzhou LEXAN PC EXL1413T